Mainboard SuperMicro X10SLL

Mainboard SuperMicro X10SLL

1,200,000

  1. Single socket H3 (LGA 1150) supports
    Intel® Xeon® E3-1200 v3/v4, 4th gen.
    Core i3, Pentium, Celeron processors
  2. Intel® C222 Express PCH
  3. Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
  4. Dual Gigabit Ethernet LAN ports (1 Intel® i217LM & 1 Intel® i210AT)
  5. 2 SATA (6Gbps), 4 SATA (3Gbps)
  6. 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 3.0 x8, and 1 PCI-E 2.0 x4 (in x8) slots
  7. 2 USB 3.0 (1 Type-A + 1 via header)
    6 USB 2.0 (4 rear + 2 via header)
  8. Integrated IPMI 2.0 with KVM and Dedicated LAN
  9. SATA DOM power connector support
Danh mục:

Mô tả

MBD-x10sll-f
  • x10sll-f
Physical Stats
Form Factor
  • Micro-ATX
Dimensions
  • 9.6″ x 9.6″ (24.38cm x 24.38cm)
Processor/Cache
CPU
  • Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.
  • Single Socket LGA 1150 supported, CPU TDP support 85W
System Memory
Memory Capacity
  • Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots
  • 4x 240-pin DDR3 DIMM sockets
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.35V, 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C222 Express PCH
SATA
  • SATA3 (6 Gbps) ports; RAID 0,1
  • Intel® C222 controller for 4 SATA2 (3 Gbps) ports; RAID 0,1,5,10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 with 10/100/1000M bps MAC
Network Controllers
  • Intel® Ethernet Controller I210-ATIntel® Ethernet Controller I217LMSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputRealtek RTL8211E PHY (dedicated IPMI)
Graphics
  • Aspeed AST2400 BMC
Input / Output
SATA
  • 2 SATA3 (6Gbps) port
  • 4 SATA2 (3Gbps) ports
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 6 USB 2.0 ports (4 rear + 2 headers)
  • 2 USB 3.0 ports (1 header + 1 Type A)
Video Output
  • 1 VGA port
Serial Port / Header
  • 2 COM Ports (1 rear, 1 header)
TPM
  • 1 TPM Header
Expansion Slots
PCI-E
  • 1 PCI-E 3.0 x8 (in x16 slot),
  • 1 PCI-E 3.0 x8
  • 1 PCI-E 2.0 x4 (in x8 slot)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI (SMBIOS) 2.7
  • ACPI 5.0
  • USB Keyboard support
Management
Software
  • IPMI2.0, NMI, SuperDoctor® III, Watchdog
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
PC Health Monitoring
Voltage
  • +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, Chipset Voltage, HT, Memory, Monitors for CPU Cores, VBAT
FAN
  • 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control)
Temperature
  • Monitoring for CPU and chassis environment, CPU thermal trip support, FC temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI
LED
  • CPU / System Overheat LED, +5V Standby alert LED
Other Features
  • Chassis intrusion detection, Chassis intrusion header
Operating Environment
Operating Temperature Range
  • 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
  • -40°C – 70°C (-40°F – 158°F)
Operating Relative Humidity Range
  • 8% – 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% – 95% (non-condensing)

Đánh giá

Chưa có đánh giá nào.


Hãy là người đầu tiên nhận xét “Mainboard SuperMicro X10SLL”

0916 679 789

You've just added this product to the cart: